Cart 0
Helm Station Pad - Large (16" x 39")
Move your mouse over image or click to enlarge
Helm Station Pad - Large (16" x 39") Helm Station Pad - Large (16" x 39") - Boat Carpet Outlet Helm Station Pad - Large (16" x 39") Helm Station Pad - Large (16" x 39")

Helm Station Pad - Large (16" x 39")

$ 159.95

Overview

The Large SeaDek Anti-Fatigue Helm Station Pad provides the utmost of comfort while standing for long hours on the water. Made from closed-cell PE/EVA blended foam material, this soft yet durable, 16” x 39” pad features 13mm foam that absorbs impact and an embossed surface with exceptional non-skid characteristics to provide safety and stability. The Large Helm Station Pad is available in a variety of colors to match any boat and is backed with our 3M™ pressure sensitive adhesive for an easy peel-and-stick installation.

 

Sheet Material Features

SeaDek manufactures the finest helm pads on the market today. Made from closed-cell PE/EVA blended materials, specifically formulated for the marine environment, SeaDek's Stock Helm Station pads features 13mm foam to absorb impacts and micro-dot embossing on the surface for durability and safety. Available in two sizes, 14"x36" and 16"x39", color options are White over storm gray, Caribbean blue over storm gray, Seafoam Green over storm gray, Beach sand over black, Black over storm gray, Storm gray over black, Cool gray over storm gray, Mica over black, Army camo over black, Faux teak brown over black. If the two standard sizes won't work, SeaDek offers custom helm pads as well. You can even have custom text, logos or graphics routed right into the pad.

Stock Helm Station Pads: 14"x36" and 16"x39" available in a variety of colors. Embossed surface.

Faux Teak Helm Station Pads: The look of teak, comfort of EVA foam, 16"x39" with sanded textured surface.

Custom Helm Station Pads: Custom pads can be made in a large number of sizes and colors. Custom logos, text and graphics can be added. Minimum order on custom pads is $159.95.

All SeaDek products feature 3M™ pressure sensitive adhesive. Simply pull the backing off and press the helm pad into place. Your pad stays put and so do you.

 

Sheet Material Installation Instructions

The only items you’ll need for your installation should be a sharp razor blade, masking tape, window cleaner and a clean cloth.

Thoroughly clean the area where SeaDek will be applied. We recommend using a cleaner that will not leave any residue. A glass cleaner used with a clean cloth or scotch-bright pad works well. Make sure the area is completely dry before applying the pad.

If there is any glue, grease, adhesive or other substances on the area that the pads are to be applied, mineral spirits followed by acetone may be used to remove them. Be sure to use a glass cleaner afterwards as suggested above. Again the platform surface must be completely dry before applying the pad.

If pads are being applied to a new boat right from the factory it is very important that all mold release is thoroughly removed from the boat surface. Be sure to check with the boat manufacturer before applying pads. Arrange the pad to the exact location to be covered and verify proper fit and placement. Once you are sure the pad is the right size and are happy with the location turn the pad over so that the paper backing is facing up. With a sharp razor, carefully cut the paper backing right down the center being careful not to cut into the pad. From the center, peel up each side a little to make sure the backing is completely cut all the way through.

Turn the pad back over and reposition the pad exactly where you want it to be installed. Firmly secure one side of the pad to the platform using two-inch masking tape.

Now lift up the untapped side of the pad with one hand and loosen the paper backing with the other. This process is a little easier if you have someone to help you out. Slowly and carefully pull up the rest of the backing while applying the pad to the platform. Use your hand to apply pressure to the pad to assure a firm bond between the pad and the platform. Now remove the tape from the other side of the pad and repeat the application process just like you did on the first side. Take time to press the entire pad into place with your hands especially around the edges of the pad.

You can watch a video demonstration of this installation on our website: http://www.seadek.com under the DIY section.


Share this Product


More from this collection